Husqvarna TC 250 2010 Workshop Manual page 409

Chassis
The single frame branches off at the exhaust and is made of steel tubes with circular, rectangular and ellipsoidal section; the rear
chassis is made from light alloy. Refer to the figure for a quick inspection. Use the dimensions reported below to determine whether
the chassis needs realigning or replacing.
A badly damaged chassis must be replaced.
STANDARD mm (in.)
AXIS
A
B
C
D
E
G
I
L
M
N
Rake
Part. N. 8000 H1489 (10-2009)
CHASSIS AND WHEELS
"X"
-576.7 (22.7) +440.5 (17.34)
-460 (18.11) +423 (16.65)
-442 (17.40) +259 (10.19)
-394.2 (15.52) +337.2 (13.27)
-311 (12.24) +23.2 (0.91)
-262.5 (10.33)
+65.5 (2.57) +170 (6.69)
-20 (0.78) +335.4 (13.20)
-84.8 (3.33) +374 (14.72)
-430.1 (16.93) +576.1 (22.68)
26°
"Y"
-81.5 (3.2)
Y.3
"X" "Y"
-555.2 440.5
-425 435.5
-425 270
-369 342.5
-274.8
-200 -148.6
65 200
-14 335.4
-94.5 373
390 584.1
4.9