Clutch Master Cylinder Servicing - Husqvarna TC 250 2010 Workshop Manual

Hide thumbs Also See for TC 250 2010:

Table of Contents

HYDRAULICALLY CONTROLLED CLUTCH

Clutch master cylinder servicing

Drain the circuit, detach the master cylinder from the left side of the handlebar

and take it apart. Replace all seals, reassemble the master cylinder and refit it

to the handlebar. Reconnect the hose and fill fresh fluid into the reservoir; bleed

the system as described in the relevant paragraph.

Part. N. 8000 H1489 (10-2009)

Show Quick Links

Table of Contents

Tc 250 2009 Txc 250 2010