GENERAL PROCEDURES
Clutch hose removal
- Loosen the fitting (1) of the clutch hose (2) on the left-hand of the engine.
-
Drain any oil left in the hose. On assembly, bleed the clutch system as de-
scribed in Section "P".
Horn removal (TE)
-
Remove saddle and fuel tank (in this order) as outlined in the relevant para-
graphs.
-
Loosen the screw (1) securing the spoiler to the right-hand radiator.
-
Disconnect the two connectors (2) and remove the horn (3) with its bracket.
E.20
Part. N. 8000 H1489 (10-2009)