Flywheel And Starter Motor Installation (Te-Txc) - Husqvarna TC 250 2010 Workshop Manual

Hide thumbs Also See for TC 250 2010:

Table of Contents

ENGINE REASSEMBLY

Flywheel and starter motor installation (TE - TXC)

Clean flywheel rotor to remove any debris suspended in swirling oil and captured

by the magnets. Fit the tab (1) to the crankshaft.

Lubricate needle roller bearing (2) and thrust ring (3) with engine oil and install

them, making sure the thrust ring slots are pointing outwards.

Lubricate the freewheel (4) with engine oil and refit it.

Part. N. 8000 H1489 (10-2009)

Show Quick Links

Chapters

Table of Contents

Tc 250 2009 Txc 250 2010