Engine Cooling System Overhaul (Te-Txc) - Husqvarna TC 250 2010 Workshop Manual

ENGINE COOLING

Engine cooling system overhaul (TE-TXC)

If the coolant runs too hot, check the radiators. Any foreign matter trapped
between the fins (such as leaves, bugs, mud, etc.) will obstruct air flow and
must be removed carefully to avoid damage to radiator. Straighten any bent
fins to ensure free flow of air. If the cooling mass is clogged or damaged, no
more than 20% of its surface must be affected. If damage exceeds this limit,
the radiator must be replaced. Periodically check the connecting hoses (see
Section B, "Scheduled Maintenance Chart"); this will avoid coolant leakage and
consequent engine seizure. If hoses show cracks, swelling or hardening due
to sheaths desiccation, their replacement shall be advisable. Check the correct
tightening of the clamps.
Part. N. 8000 H1489 (10-2009) N.7