Solenoid Starter Removal (Te-Txc) - Husqvarna TC 250 2010 Workshop Manual

Solenoid starter removal (TE – TXC)
- Remove saddle and left-hand side panel (in this order) as outlined in the
relevant paragraphs.
- Disconnect the negative and positive cables of the battery.
- Disconnect the starter motor positive cable (1) from the solenoid starter.
- Disconnect the connector (2) and remove the solenoid starter (3) from its
mount.
Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
E.17