Carburettor Inspection (Tc) - Husqvarna TC 250 2010 Workshop Manual

Carburettor inspection (TC)

1 . Check:
- Carburettor body
If dirty: clean.
NOTE
- Clean using petroleum based solvent. Blow all holes and jets with compressed air.
- Never use metal wire.
2. Check:
- Main jet (1)
- Idle jet (2)
- Main nozzle (9)
- Idle screw (7)
- Starting jet (3)
- Main air jet (4)
- Idle air jet (8)
If damaged: replace
If dirty: clean
NOTE
- Clean using petroleum based solvent. Blow all holes and jets with compressed air.
- Never use metal wire.
Part. N. 8000 H1489 (10-2009)
ENGINE OVERHAUL
G.23