22 Ignition System; Ignition Coil - Checking The; Secondary Winding; Checking The Spark Plug Connector - Husqvarna FE 450 2014 Repair Manual

22 IGNITION SYSTEM

22.1
22.2
2
22.3
240
Ignition coil - checking the seconda
601171-10

Checking the spark plug connector

1
601170-10
Alternator - checkin the stator windin
EZ
601211-10

winding

Condition
Ignition coil cylinder 1 is disconnected.
Spark plug connector cylinder 1 has been removed.
Ignition coil cylinder 1 - check the secondary winding
resistance
Measure the resistance between the specified points.
0
Ignition coil cylinder 1 pin
der 1 pin
3
Ignition coil

Secondary winding

resistance at: 20 °c
(68 °F)
If the displayed value does not correspond to specifica­
tions:
- Change the ignition coil.
Condition
Spark plug connector cylinder 1 has been removed.
Measure the resistance between the specified points.
0
Measuring point 1 - Measuring point 2
Spark plug connector
Resistance at: 20 °C
(68 °F)
If the specification is not reached:
-
Change the spark plug connector.
Condition
The stator is disconnected.
Preparatory work
- Remove the seat. (l!!ll p. 91)
Main work
Stator winding, measurement I - check the resistance
Measure the resistance between the specified points.
0
Stator, connector
2
Alternator
Resistance of stator
winding at: 20 °C (68 °F)
If the value displayed does not meet specifications:
- Change the stator.
(-) - Ignition coil cylin­
2
10.8 ... 16.2 kn
3.75 ... 6.25 kn
1
pin - Stator, connector
EZ 1
0.368 ... 0.552 n
I
..
..
pin
EZ