Cylinder Head Removal - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
2
4
Workshop Manual Ed. 07-2012
ENGINE DISASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Cylinder head removal

- Remove the head cover as described in the relevant paragraph.
1
- Remove the camshafts as described in the relevant paragraph.
- Remove the chain tensioner (1) as follows:
• Loosen the screw (2) with an 8 mm wrench.
H11327
• Turn the screw (3) fully clockwise with a flat head screwdriver until locking
it so as to release the spring.
3
H11328
• Loosen the two screws (4) using an 8 mm wrench and remove the chain
tensioner (1).
1
4
H11329
F.10