Removing The Tpm - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

System board and components
Concluding steps
▶ Install the riser module 2, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
▶ Enable the TPM in the system board BIOS, see
system board BIOS" on page
Enabling the TPM in the system board BIOS
Proceed as follows:
▶ Switch on or restart your server.
▶ As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶ Select the Advanced menu.
▶ Select the Trusted Computing submenu.
▶ Set the TPM Support and TPM State settings to Enabled.
▶ Under Pending TPM operation, select the desired TPM operation mode.
▶ Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
15.4.4

Removing the TPM

Field Replaceable Unit
(FRU)
298
"Installing a riser module" on page
53.
57.
60.
298.
Upgrade and Maintenance Manual
61.
86.
"Enabling the TPM in the
Hardware: 30 minutes
64.
RX1330 M5