Expansion cards, interposer boards and battery backup units
Figure 47: Removing the SFP+ transceiver
Ê Pull the SFP+ transceiver module out of its socket connector.
Ê Reattach the protective optical port plug to the transceiver optical bores.
I
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
6.2.2.3
Replacing SFP+ transceiver modules
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
Required tools
Removing SFP+ transceiver modules: tool-less
●
100
Upgrade and Maintenance Manual
CX270 S2