Searching For A Destination - Konica Minolta bizhub c650 User Manual

Sending a user box document

Searching for a destination

A search for the desired destination can be performed using any of the following methods. The following
procedure describes how to perform a search.
Method
Index
Address Type
Search
Address search
!
1
2
C650
Downloaded From ManualsPrinter.com Manuals
– Additional destinations can be added by directly typing in the address.
The button appears selected, and the destination appears under "Broadcast Destinations".
Description
This button appears if "Default Address Book" (displayed by touching [Custom Display
Settings] on the User Settings screen, then [Fax/Scan Settings]) is set to "Address
Type". The index characters can be searched based on the character that was speci-
fied when the destination was registered.
This button appears if "Default Address Book" (displayed by touching [Custom Display
Settings] on the User Settings screen, then [Fax/Scan Settings]) is set to "Index". The
destination types can be searched based on the type that was specified when the des-
tination was registered.
Type in the destination name or part of the address to search for the corresponding
address.
An LDAP search can be performed if an LDAP server is being used, for example, for
user management. Search the addresses registered on the LDAP server for the ad-
dress that corresponds to the conditions. A basic search, where a keyword is entered,
and an advanced search, where multiple conditions are used to narrow down the
search, are available.
Detail
In order to perform an Address search, settings for the Address server must be specified from
Administrator mode. For details, refer to "Enabling LDAP" in the User's Guide [Network Scanner
Operations].
For details on performing an Address search, refer to "Selecting a destination with an Address search"
on page 5-16.
From the Use Document screen, select the document to be sent, and then touch [Send].
Touch [Address Book], and then touch [Search].
5
5-9