Panasonic DP-C321 Service Handbook page 386

3-312
[Description]:
0: Non Spool
1: Spool
36. 770-085
[NVM Name]: Transport
[PSW Display]: SMB Transport Protocol
[Initial Value]: both
[Setup Range]: -
[Read/Write]: Read/Write
[Description]: 2: TCP/IP, 4: NetBeui, 6: both
37. 770-090
[NVM Name]: Start Up Setting
[PSW Display]: IPP Port Enable
[Initial Value]: Stop
[Setup Range]: 0~1
[Read/Write]: Read/Write
[Description]:
0: Stop
1: Start Up
38. 770-091
[NVM Name]: Print Mode
[PSW Display]: IPP Print Mode Type
[Initial Value]: Auto
[Setup Range]: -
[Read/Write]: Read/Write
[Description]:
1:Auto, 3:HPGL2, 5:PostScript, 2:PCL6
39. 770-092
[NVM Name]: JCL Switch
[PSW Display]: IPP JCL Enable is IPP PJL Enable
[Initial Value]: ON
[Setup Range]: FALSE~TRUE
[Read/Write]: Read/Write
[Description]:
0: Off
1: On
40. 770-093
[NVM Name]: Filter
[PSW Display]: IPP TBCP Valid Flag
[Initial Value]: None
[Setup Range]: FALSE~TRUE
[Read/Write]: Read/Write
[Description]:
0: None
1: TBCP
41. 770-094
[NVM Name]: Acl Authorisation (Acl Authorisation)
[PSW Display]: Acl Authorisation
[Initial Value]: OFF (none)
[Setup Range]: -
[Read/Write]: Read/Write
[Description]:
On (local)
Off (none)
42. 770-095
[NVM Name]: Use DNS Name
[PSW Display]: Use DNS Name
[Initial Value]: On
[Setup Range]: FALSE~TRUE
[Read/Write]: Read/Write
[Description]: On, Off
43. 770-097
[NVM Name]: Port no. (Value can be changed by user)
[PSW Display]: Port no.
[Initial Value]: 80
[Setup Range]: 0~9999
[Read/Write]: Read/Write
[Description]: 0, 80, any one value between 8000~9999
44. 770-098
[NVM Name]: Spool Type
[PSW Display]: IPP Spool Mode
[Initial Value]: Non Spool
[Setup Range]: -
Chapter 3 Troubleshooting