Take Away Sensor On Jam (From Ttm Tray 4 Feed ); Pob Sensor On Jam - Panasonic DP-C321 Service Handbook

008-151 TAKE AWAY SENSOR ON JAM (FROM
TTM TRAY 3 FEED )
Description The TAKE AWAY SENSOR does not detect paper
within the specified time after it has been fed from the TRAY 3.
DC330 Codes to be checked
DC330 [008-106] TAKE AWAY SENSOR
DC330 [008-029~008-036] TAKE AWAY MOTOR 1
(TTM)
Check Items
• The TAKE AWAY SENSOR for an operation failure
• The TAKE AWAY MOTOR 1 for an operation failure
• The TAKE AWAY ROLLER 2 for wear or a revolution
failure
• The TAKE AWAY ROLLER 3 for wear or a revolution
failure
• A paper transportation failure due to a foreign substance/
burr on the paper path
• Use of paper out of spec (Spec: Refer to Chapter 1
Specifications.)
• The TRAY MODULE PWB for a failure
3-45
008-152 TAKE AWAY SENSOR ON JAM (FROM
TTM TRAY 4 FEED )
Description The TAKE AWAY SENSOR does not detect paper
within the specified time after it has been fed from the TRAY 4.
DC330 Codes to be checked
DC330 [008-106] TAKE AWAY SENSOR
DC330 [008-029~008-036] TAKE AWAY MOTOR 1
(TTM)
DC330 [008-029~008-036] TAKE AWAY MOTOR 2
(TTM)
Check Items
• The TAKE AWAY SENSOR for an operation failure
• The TAKE AWAY MOTOR 1 for an operation failure
• The TAKE AWAY MOTOR 2 for an operation failure
• The TAKE AWAY ROLLER 2 for wear or a revolution
failure
• The TAKE AWAY ROLLER 3 for wear or a revolution
failure
• The TAKE AWAY ROLLER 4 for wear or a revolution
failure
• A paper transportation failure due to a foreign substance/
burr on the paper path
• Use of paper out of spec (Spec: Refer to Chapter 1
Specifications.)
• The TRAY MODULE PWB for a failure

008-164 POB SENSOR ON JAM

Description The POB SENSOR does not detect paper within
the specific time after the REGI CLUTCH was turned On.
For the DC330 that have "Notes" in the following
FIP, check the machine status before selecting and
executing the appropriate DC330.
If the Diag with On signals is executed to the part
that is On, the communication link between the PSW
and the Main Unit may be broken.
In addition, the Diagnostics button indicated in
"Notes" is set to be executed after the Chain-Link
No. is selected.
DC330 Codes to be checked
DC330 [009-201] POB SENSOR
DC330 [004-004] MAIN MOTOR
DC330 [008-037] REGI CLUTCH
DC330 [009-051] (Notes) 2ND BTR RETRACT MOTOR
(CONTACT)
DC330 [009-052] (Notes) 2ND BTR RETRACT MOTOR
(RETRACT)
Check Items
• The IBT for paper wrapping around it
• The 2ND BTR for a revolution failure and the Drive
Transmission Gear for breakage
• The 2ND BTR for a contact failure
• The POB SENSOR for an operation failure
• The REGI ROLLER for wear and a revolution failure
• The REGI CLUTCH for operation failure
• A paper transportation failure due to a foreign substance/
burr on the paper path
• Use of paper out of spec (Spec: Refer to Chapter 1
Specifications.)
• The I/F PWB, MCU PWB, or ESS PWB for a failure
Chapter 3 Troubleshooting