Panasonic DP-C321 Service Handbook page 266

3-192
122.012-050
Stacker Motor UP On/Off
[PSW Display]: Stacker Motor UP On/Off
[Operation Description]:
Turns Off automatically after 500 msec.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-51
[Reference BSD]: CH11.10A
123.012-051
Stacker Motor Down On/Off
[PSW Display]: Stacker Motor Down On/Off
[Operation Description]:
Turns Off automatically after 500 msec.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-50
[Reference BSD]: CH11.10A
124.012-060
H-Tra Gate In Solenoid Open
[PSW Display]: H-Tra Gate In Solenoid Open
[Operation Description]:
Turns Off automatically after 200 msec.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-61
[Reference BSD]: CH11.3
125.012-061
H-Tra Gate In Solenoid Close
[PSW Display]: H-Tra Gate In Solenoid Close
[Operation Description]:
Turns Off automatically after 200 msec.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-60
[Reference BSD]: CH11.3
126.012-070
Decurler Cam Clutch On
[PSW Display]: Decurler Cam Clutch On
[Operation Description]:
Turns Off automatically after 1000 msec.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-71
[Reference BSD]: CH11.5
127.012-071
Decurler Penetration Change
[PSW Display]: Decurler Penetration Change
[Operation Description]:
Turns Off automatically after the Decurler Home Snr detected On. (Stops when
the Home Snr detected On -> Off or Off -> On by turning On Decurler Cam
Clutch 500ms after driving the Main Drive Motor.)
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-1, 12-70
[Reference BSD]: CH11.5
128.012-080
Stapler Move Motor High Front On/Off
[PSW Display]: Stapler Move Motor High Front On/Off
[Operation Description]:
Turns Off automatically at 250pulses.
On:
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 12-81, 12-82, 12-83
[Reference BSD]: CH11.7
129.012-081
Stapler Move Motor Low Font On/Off
Chapter 3 Troubleshooting