Panasonic DP-C321 Service Handbook page 171

016-782 Scan Server Login Error
[Detection Conditions]
<Server Login Error during Scanning>
Cannot log in to the Server during Scan to Server file
transfer operation.
[Actions]
(1) Set the log-in name and password in the destination
server.
(2) Make correct settings for the attributes of the Job
Template file.
(3) From a client PC, set the same account as the above
as a resource in CW.
016-788 Mailbox to PC Failure (via Browser)
[Detection Conditions]
Retrieval Failed at Scan to PC (via Web Browser)
[Actions]
(1) Improve the connection status to a network.
(2) Check whether there is a problem such as
duplicated IP addresses.
016-789 REDIRECTOR_TEMP_HD_FULL
[Detection Conditions]
Size of Scan to Email data was more than 100MB.
[Actions]
Re-send the data after reduced the data or changed the
resolution.
Or divides it to several files.
016-793 MF I/O HD Full
[Detection Conditions]
<MFIO>HD Full
[Actions] Insufficient Area of Hard Disk (MF I/O)
3-97
016-950 Tray 1 Empty
[Detection Conditions] Tray 1 Empty
[Actions] Add paper.
016-951 Tray 2 Empty
[Detection Conditions] Tray 2 Empty
[Actions] Add paper.
016-952 Tray 3 Empty
[Detection Conditions] Tray 3 Empty
[Actions] Add paper.
016-953 Tray 4 Empty
[Detection Conditions] Tray 4 Empty
[Actions] Add paper.
016-954 Tray SMH Empty
[Detection Conditions] Tray SMH Empty
[Actions] Add paper.
016-958 Size Mismatch 1 SMH Size Mismatch
[Detection Conditions]
Size Mismatch 1
SMH Size Mismatch
[Actions] Load proper paper in the tray.
016-959 Size Mismatch Tray 1 Size Mismatch
[Detection Conditions]
Size Mismatch
Tray 1 Size Mismatch
[Actions] Load proper paper in the tray.
016-960 Size Mismatch Tray 2 Size Mismatch
[Detection Conditions]
Size Mismatch Tray 2 Size Mismatch
[Actions] Load proper paper in the tray.
016-961 Size Mismatch Tray 3 Size Mismatch
[Detection Conditions]
Size Mismatch
Tray 3 Size Mismatch
[Actions] Load proper paper in the tray.
016-962 Size Mismatch Tray 4 Size Mismatch
[Detection Conditions]
Size Mismatch
Tray 4 Size Mismatch
[Actions] Load proper paper in the tray.
016-965 ATS/APS No Paper APS/ATS NG (No Paper)
[Detection Conditions]
ATS/APS No Paper
APS/ATS NG (No Paper)
[Actions] Add paper.
016-966 ATS/APS No Destination Error ATS/APS
NG (Other than No Paper)
[Detection Conditions]
ATS/APS No Destination Error
ATS/APS NG (Other than No Paper)
[Actions] Change the settings and replace the Trays.
016-981 FULL status was detected at HD access.
FULL status was not cleared even during
waiting for timing. (One or more pages are
already stored.)
[Detection Conditions]
FULL status was detected at HD access.
FULL status was not cleared even during waiting for
timing.
(One or more pages are already stored.)
[Actions] Depends on the operation specifications of
servicing
Chapter 3 Troubleshooting