Panasonic DP-C321 Service Handbook page 185

[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-352 NetWare Soft Failure
[Detection Conditions]
Fatal error related to the NetWare
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-353 lpd Soft Failure
[Detection Conditions]
Fatal error related to the lpd
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-355 SNMP Agent Soft Failure
[Detection Conditions]
Fatal error related to the SNMP Agent
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
3-111
116-356 EWS Soft Failure
[Detection Conditions]
Fatal error related to the EWS
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-357 PS Soft Failure
[Detection Conditions]
PS Fatal System Error
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
Replace the ESS PWB (PL13.1).
116-358 Salutation Soft Failure
[Detection Conditions]
Fatal error related to the Salutation
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-359 PLW Soft Failure
[Detection Conditions]
Fatal error in PLW
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-360 SMB Soft Failure
[Detection Conditions]
Fatal error related to the SMB
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
116-361 Spool Fatal HDD
[Detection Conditions]
Fatal error of the SPL HDD
The spoolCont detected an error at HDD access.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Run the HDD Diag (DC355).
(2) Replace the HDD (PL13.1).
(3) Replace the ESS PWB (PL13.1).
116-365 Spool Fatal
[Detection Conditions]
Fatal error of the SPL
Due to an error during the software processing, the
subsequent processes cannot be performed.
[Actions]
Turn the power On/Off and perform the following if
the problem persists.
(1) Perform re-installation of the ESS software.
(2) Replace the ESS PWB (PL13.1).
Chapter 3 Troubleshooting