Dc934 Adc/Agc Setup (Color Image Control) - Panasonic DP-C321 Service Handbook

3-156

3. 4. 4. 23 DC934 ADC/AGC Setup (Color Image Control)

Function Sets up the ADC target value by reading the ADC (1-gradation) patch for potential
control on the IBT with the ADC sensor. At the same time, sets up the desired LD light amount.
For detailed procedure, refer to Chapter 2 ADJ1.1.4.
Procedure
1. Select the "Color Image Ctrl" tab on the Service Mode screen.
2. Select [DC934] on the Color Image Ctrl screen.
3. The ADC/AGC Setup screen is displayed.
4. Select [Execute].
5. Select [Close] to return to the Color Image Ctrl screen.
Chapter 3 Troubleshooting