Panasonic DP-C321 Service Handbook page 167

016-503 Scan-to-Email Failure
[Detection Conditions]
While sending to an SMTP Server an IP Address error
occurred.
[Actions]
Specify the correct SMTP Server Name or IP Address.
016-504 Scan-to-Email Failure
[Detection Conditions]
While sending to a POP Server an IP Address error
occurred.
[Actions]
Specify the correct POP Server Name or IP Address.
016-505 Scan-to-Email Failure
[Detection Conditions]
While sending to a POP Server an Account
Information error occurred.
[Actions]
Specify the correct POP Server Account Information.
016-590 Read Verify Error (Partition A)
[Detection Conditions]
A verify error has occurred in the HDD partition A
during PC-Diag operation from PSW.
[Actions]
Set up the HDD partition A and perform the verify test
again.
016-591 Read Verify Error (Partition B)
[Detection Conditions]
A verify error has occurred in the HDD partition B
duringt PC-Diag operation from PSW.
[Actions]
Set up the HDD partition B and perform the verify test
again.
3-93
016-592 Read Verify Error (Partition C)
[Detection Conditions]
A verify error has occurred in the HDD partition C
during PC-Diag operation from PSW.
[Actions]
Set up the HDD partition C and perform the verify test
again.
016-593 Read Verify Error (Partition D)
[Detection Conditions]
A verify error has occurred in the HDD partition D
during PC-Diag operation from PSW.
[Actions]
Set up the HDD partition D and perform the verify test
again.
016-594 Read Verify Error (Partition E)
[Detection Conditions]
A verify error has occurred in the HDD partition E
during PC-Diag operation from PSW.
[Actions]
Set up the HDD partition E and perform the verify test
again.
016-595 Read Verify Error (Partition H)
[Detection Conditions]
A verify error has occurred in the HDD partition H
during PC-Diag operation from PSW.
[Actions] ]
Set up the HDD partition H and perform the verify test
again.
016-704 Security Box is Full
[Detection Conditions]
The system detected that a Mailbox was full (it
exceeded the maximum number of documents per
Box) and aborted a job.
FULL status was detected during HDD access and a
job was aborted.
[Actions]
Delete unwanted documents and retry the process.
016-705 Security Storage Without an HDD
[Detection Conditions]
Registry for Secure Print has failed because Security
Storage cannot be performed without HDD.
[Actions]
Check whether the HDD is installed.
If the problem has occurred at installation, check
whether the Secure Print operations are correct.
016-706 Max. Number of Users Exceeded
[Detection Conditions]
The system detected that a job exceeded the maximum
number of users for Secure and Proof Prints and
aborted the job.
FULL status was detected during HDD access and the
job was aborted.
[Actions]
Delete unwanted documents/users and retry printing.
016-707 PROOF_PRINT_FAILURE
[Detection Conditions]
Detects HDD error during Proof Print data storage.
[Actions]
Increase partition size for confidential data
Chapter 3 Troubleshooting