Auto 2-Sided Print; Output Tray Capacity; Remaining Paper Amount Detection - Panasonic DP-C321 Service Handbook

1. 1. 12 Auto 2-Sided Print

Auto 2-Sided Print is available for the plain paper fed from the Tray 1 and 2, MSI and TTM.
However, Auto 2-Sided Print cannot be performed under the following conditions:
• When using paper lighter than 17 lb or heavier than 28 lb
• When using transparencies
• When using the paper whose width is more than 12 x 18", 12 x 19" size.
• 2-Sided and 2-sheets placement: 2-sheets placement printing can be selected when the paper
length in the Slow Scan direction is between 5.8" and 8.5", 1-sheet printing when between
8.5" and 17". The length in the Fast Scan direction is between 5.8" and 11.7".
• MSI 2-Sided: For the paper within the weight range that can be fed from the MSI Tray, 2-
Sided printing is possible by manually feeding the paper printed on side 1. The paper types
that can be selected are "Heavy Weight 1, Side 2", "Heavy Weight 2, Side 2", and "Plain Paper
S".

1. 1. 13 Output Tray Capacity

• Face Down Tray (Internal of machine)
Sizes that can be loaded: All paper sizes the machine handles
Number of Sheets: The average number of sheets that can be loaded is as follows.
(Using Fresh paper.)
Size and
Paper Type Direction
Plain 20 lb paper 8.5 x 11" LEF
Plain 20 lb paper 11 x 17" SEF
1-7
Capacity
400
200
The above data is meant for 1-Side printing.
Finishing capability is not defined for 8.5 x 11" SEF and Letter SEF.
For Finisher, refer to 1.1.21.8 Stacker Capacity.
When the Finisher is installed, the capacity of the Face Down Tray decreases to 200
sheets.
Full Stack Detection: Enabled
Finishing Capability: Able to align paper easily without folding or disorder.
Output Direction: Face Down

1. 1. 14 Remaining Paper Amount Detection

In Trays 1 to 4, the amount of remaining paper is detected and expressed by 5 percentage levels,
0 %, 25 %, 50 %, 75 %, and 100 %.
Chapter 1 General