Panasonic DP-C321 Service Handbook page 253

35. 008-005
#3Feed Motor (Fwd)
[PSW Display]: #3Feed Motor (Fwd)
[Operation Description]:
Feed (Turn #3Feed Motor On in paper feed direction at 192mm/sec)
On: -
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]:
[Reference BSD]: CH7.7
36. 008-006
#3Feed Motor (Rev)
[PSW Display]: #3Feed Motor (Rev)
[Operation Description]: Lift Up
It turns Off automatically 6sec after Lift Up has started, or when the Level Snr
detected Lift Up.
Lift Up cannot be performed when the Level Snr should detect Lift Up.
On: -
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 8-005
[Reference BSD]: CH7.7
37. 008-007
#4Feed Motor (Fwd)
[PSW Display]: #4Feed Motor (Fwd)
[Operation Description]:
Feed (Turn #4Feed Motor On in paper feed direction at 192mm/sec)
On: -
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]: 8-008
[Reference BSD]: CH7.8
38. 008-008
#4Feed Motor (Rev)
[PSW Display]: #4Feed Motor (Rev)
3-179
[Operation Description]: Lift Up
It turns Off automatically 6sec after Lift Up has started, or when the Level Snr
detected Lift Up.
Lift Up cannot be performed when the Level Snr should detect Lift Up.
On: -
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: 8-007
[Reference BSD]: CH7.8
39. 008-009
Dup Motor(200.1mm/sec)
[PSW Display]: Dup Motor (200.1mm/sec)
[Operation Description]:
Start operation. Turns Off automatically at 1000msec.
On: Low
[T-ON]: On
[Cycle]: On
[Multiple Output Prohibited Items]: 8-010, 011, 012, 053, 054, 055, 056
[Reference BSD]: CH10.5
40. 008-010
Dup Motor(104mm/sec)
[PSW Display]: Dup Motor (104mm/sec)
[Operation Description]:
Start operation. Turns Off automatically at 1000msec.
On: Low
[T-ON]: On
[Cycle]: On
[Multiple Output Prohibited Items]: 8-009, 011, 012, 053, 054, 055, 056
[Reference BSD]: CH10.5
41. 008-011
Dup Motor (200.1mm/sec) Long
[PSW Display]: Dup Motor (200.1mm/sec) Long
[Operation Description]:
Start operation
On: Low
Chapter 3 Troubleshooting