Panasonic DP-C321 Service Handbook page 249

7. 004-012
IBT Motor (Half Speed)
[PSW Display]: IBT Motor (52mm/sec)
[Operation Description]:
Rotate at half speed.
Operate with the IBT unit removed. The Belt might be damaged since the Belt Work
Control is not performed.
On: Every 4 phase H/L toggling
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]: 004-012, 004-013
[Reference BSD]: CH9.17
8. 004-013
IBT Motor (Double Speed)
[PSW Display]: IBT Motor (194mm/sec)
[Operation Description]:
Rotate at double speed.
Operate with the IBT unit removed. The Belt might be damaged since the Belt Work
Control is not performed.
On: Every 4 phase H/L toggling
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]: 004-002, 004-012
[Reference BSD]: CH9.7
9. 004-014
IBT_5V ON
[PSW Display]: IBT_5V ON
[Operation Description]:
On: High
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]: -
[Reference BSD]:
For IBT Home SNR: CH9.19
For 1st BTR Retract Sensor: CH9.18
3-175
10. 004-050
FUSER FAN, LV FAN and REAR FAN at High rotation
[PSW Display]: Fuser Fan, LV Fan and Rear Fan Rotation High speed
[Operation Description]:
Rotate the FUSER FAN, LV FAN and REAR FAN at high speed.
(Rotation is Low at Power On)
On: L
[T-ON]: Off
[Cycle]: Off
[Multiple Output Prohibited Items]: -
[Reference BSD]: LVPS Fan: CH1.2, Rear Fan: CH9.30, Fuser Fan: CH10.2
11. 005-011
Set Gate Solenoid Open
[PSW Display]: Set Gate Solenoid Open
[Operation Description]:
Turn Set Gate Open On (Towards bottom of Nudger Roller) for 5sec -> Auto Off
On: L
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: -
[Reference BSD]: CH5.3
12. 005-012
Set Gate Solenoid Close
[PSW Display]: Set Gate Solenoid Close
[Operation Description]:
Turn Set Gate Close On (Towards bottom of Nudger Roller) for 5sec -> Auto Off
On: Low
[T-ON]: On
[Cycle]: Off
[Multiple Output Prohibited Items]: -
[Reference BSD]: CH5.3
13. 005-040
Feed Mot.
[PSW Display]: Feed Mot.
[Operation Description]:
DADF Feed Motor for 2sec -> Auto OFF
On: Every 4 phase H/L toggling
Chapter 3 Troubleshooting