3Com NBX 100 Administrator's Manual page 328

328 C 6: NBX M
HAPTER ESSAGING
Table 73 VPIM Advanced Settings Dialog Box (continued)
Field
SMTP MAIL response
SMTP RCPT response
SMTP DATA response
SMTP DATA END response
Purpose
Definition: The amount of time that the local
system waits for an acknowledgement of a MAIL
command.
Detail: After the local system sends out a MAIL
command along with the From information, it waits
for a response from the other site to indicate that the
MAIL command was received.
Minimum: 5 minutes
Default: 5 minutes
Definition: The time that the local system waits for
an acknowledgement of a RCPT command.
Detail: When the local system receives and SMTP or
ESMTP message, it returns a RCPT command to the
sending system for each recipient listed in the To:
field.
Minimum: 5 minutes
Default: 5 minutes
Definition: The time that the local system waits for
an acknowledgement of a DATA command.
Detail: After the local system has specified all of the
recipient information, it sends a DATA command to
indicate that it is ready to send the mail message
itself. It then waits for the other site to acknowledge
the DATA command.
Minimum: 2 minutes
Default: 2 minutes
Definition: The time that the local system waits,
after sending the entire message, for an
acknowledgement from the other site that the
message was received.
Detail: After the local system sends the entire
message, it sends a single dot (ascii code 056) to the
other site. It then waits for an acknowledgement
from the other site that the dot has been received.
Minimum: 10 minutes
Default: 10 minutes