3Com NBX 100 Administrator's Manual page 318

318 C 6: NBX M
HAPTER ESSAGING
Table 68 Button Actions (continued)
Action
Transfer to Voice Mail Allows callers to leave a voice message for a person without
Exit Menu
Prompted Transfer
Reserved in Dial Plan
Single Digit Transfer
CAUTION:
Use care when allowing access to PSTN ports using Dial Plan Table 2,
as this can create the possibility of toll fraud.
Description
ringing that person's phone, or allows users to call in and
listen to their voice mail from a remote location.
Value — Not used.
Available in submenus only. Allows the caller to return to
the next menu up in the menu tree.
Value — Not used
Instructs callers to press a button before dialing a known
extension. The prompt should include a message something
like this: "If you know your party's extension, press 5, and
then dial the extension."
Value — Not used.
Interprets a specified button as the first number of an
extension. For example, in the default 4-digit dial plan,
extensions begin at 1000, so you could not use 1 as an
option for an Auto Attendant menu.
Value — Not used
Allows a caller to reach a specific destination by pressing a
specific button.
For example, you could assign button 6 to a hunt group
extension in the Sales Department. In the menu prompt, you
would record: "To reach our Sales Department,
press 6." You could also use Single Digit Transfer to
specify a destination, typically the Attendant Console
extension, for the time-out option (T/O).
By default, Single Digit Transfer can forward only to internal
extension numbers. To transfer calls to an external number,
you must first alter Table 2 of the dial plan (Incoming Table)
to specify the external number.
Value — Any valid extension