3Com NBX 100 Administrator's Manual page 110

110 C 2: D
HAPTER IAL
PreTranslatorOperation Create
Table Create
P
LAN
configuration file. For an example of this technique, see
Plan Configuration Files"
Syntax
PreTranslatorOperation Create nPreTranslatorId nEntryId
nOperId szOperation szValue
Description Creates a digit manipulation operation for a pretranslator
entry. If the specified digit manipulation operation already exists, this
command overwrites it with the new information. During pretranslation,
the system processes the list of operations in ascending
( 1 first).
nOperId
Arguments
nPreTranslatorId
— An integer in the range 1 through 32768 specifying the
nEntryId
pretranslator entry to which this operation applies.
nOperId — An integer in the range 1 through 32768. The
system processes the list of operations in ascending nOperId order
( nOperId 1 first).
— The name of the digit manipulation operation to perform.
szOperation
Values are: stripLead, stripTrail, replace, prepend, append.
— The value to use in the operation, either the string of digits to
szValue
prepend, append, replace with, or the number of digits to strip.
Syntax
Table Create nDialPlanTableId szDescription
Description Creates a dial plan table to control the routing of calls
placed by devices. Dial plan tables apply to internal devices such as
telephones, incoming calls from outside the NBX system, and Least Cost
Routes. If the dial plan table already exists, this command removes all
entries from the table, and fills the table with the new information.
on page 44.
— An integer in the range 1 through 32768.
"Creating Dial
order
nOperId