3Com NBX 100 Administrator's Manual page 212

212 C 3: D
HAPTER EVICE
C
ONFIGURATION
Table 41 Analog Terminal Adapter - Advanced Settings Parameters (continued)
Field
Caller-ID Generator Format The format in which caller ID information is passed. The
Caller-ID Generator Level
(dBm)
Caller-ID Generator Timing
(msec)
Purpose
choice depends on the country in which the NBX
system is operating. Consult with your telephone
service provider to determine the correct format.
Default: Depends on the country in which the NBX
system is operating. When you load a regional pack
(Operations > Regional Software) and select the tones
and cadences appropriate for your location
(System Configuration > System Settings >
Regional Settings > Advanced), the default value is set.
Values:
Bellcore GR-30-CORE
■
ETSI FSK
■
ETSI DTMF
■
British Telecom SIN 242
■
NTT Telephone Interface Services
■
Select this value to control the output level of the caller
ID generator.
Default: Depends on the country in which the NBX
system is operating.
When you load a regional pack (Operations >
Regional Software) and select the tones and cadences
appropriate for your location (System Configuration >
System Settings > Regional Settings > Advanced), the
default value is set on your NBX system.
Minimum: - 30 dBm
Maximum: 0 dbm
Increment: 2 dBm per step
Set this value to control the time delay from the end of
the Ring Signal to the beginning of the Caller ID signal.
Default: Depends on the country in which the NBX
system is operating.
When you load a regional pack (Operations >
Regional Software) and select the tones and cadences
appropriate for your location (System Configuration >
System Settings > Regional Settings > Advanced), the
default value is set on your NBX system.
Minimum: 100 msec
Maximum: 2000 msec