Removing A Telephone Group; Viewing Telephone Group Membership; Recording And Monitoring Telephone Calls - 3Com NBX 100 Administrator's Manual

144 C 3: D
HAPTER EVICE
Removing a
Telephone Group
Viewing Telephone
Group Membership
Recording and
Monitoring
Telephone Calls
C
ONFIGURATION
To change the name of a telephone group:
1 Select NBX NetSet >
2 Select the group whose name you want to change.
3 Click Modify. The Modify Telephone Group dialog box appears.
4 Change the name of the telephone group in the Group Name field.
5 To set call recording and monitoring as the default condition for all
telephones in this telephone group, enable the Call Record & Monitor
check box. To disable call recording and monitoring, clear the check box.
You must have installed a call recording license before you can enable the
Call Record & Monitor check box.
6 Click OK.
You can remove a telephone group if it is no longer needed.
To remove a telephone group:
1 Select NBX NetSet >
2 Select the group you want to remove.
3 Click Remove. A confirmation window appears.
4 Click Yes.
The system removes the group.
You can view a report that describes which telephones belong to each
telephone group. The report also includes membership information about
Class of Service groups.
To view the membership report, click Membership.
You do not need to select a telephone group first. The report includes
information about all telephone groups.
In the report window, click any of the column headings to arrange the
information in ascending or descending order.
If you have call recording application software that runs on a PC that is
external to the NBX system, you can record and monitor telephone calls
to and from telephones on the NBX system.
Device Configuration >
Device Configuration > Telephone Groups
Telephone Groups.
.