Security; Tapi Settings - 3Com NBX 100 Administrator's Manual

Security

TAPI Settings

To set system passwords, select System Configuration > Security. See the
Help for procedures on changing these types of passwords:
Change Administrator Password — Resets the password for
■
administrator access to NBX NetSet.
After you change an administrator password, write it down and store
it appropriately. There is no "back door" password to use if this
password is lost. If you change the default 4-digit password to an
8-digit or longer password, you cannot revert to a 4-digit password.
Reset User Password — Resets the password to a user's telephone
■
extension. After you reset the password, instruct the user to change to
a new password as soon as possible to ensure system security.
Auto Attendant Password — Limits access to Auto Attendant
■
settings and functions.
System Backup Password — Enables automated backups from an
■
external system.
Reporting Password — Limits access to Call Detail Reports, an
■
optional component of the NBX system. See
page 347 for more information.
Virtual Tie Lines Password — Enables calls over virtual tie lines to
■
"hop off" after they reach the destination NBX system. The call then
appears to originate at the destination NBX system. See
more information on setting up VTLs.
Reset Password for a Hunt Group — The password for the Hunt
■
Group is reset to the extension number of the Hunt Group.
Reset Password for a TAPI Route Point — The password for the
■
TAPI Route Point is reset to the extension number of the Route Point.
You must configure system-wide Telephony Application Programming
Interface (TAPI) settings before users can download the NBX TAPI Service
Provider (NBXTSP). You can set a maximum number of TAPI clients in the
system. You can also require users to enter passwords for TAPI devices.
Before you configure system-wide TAPI settings, install the appropriate
TAPI software. After you have the software installed, select System
Configuration > TAPI Settings to configure TAPI settings. See the System
Configuration Help for procedures on configuring TAPI settings. See the
Downloads Help for procedures on downloading NBX TSP software.
Security
"Call Reporting" on
Chapter 2
289
for