Remove a License
Usage Report
Backing Up Licenses
Restoring Backed-Up
Licenses
To configure the system to support new licenses, contact your 3Com
Voice Solutions dealer and provide the serial number. The dealer obtains a
new license key from 3Com Customer Support that enables the upgrade.
See the Help for procedures for adding a license to an NBX system.
The only license that you can remove from an NBX system is the disk
mirroring license, which enables a SuperStack 3 NBX system to use two
disks in a mirrored configuration.
CAUTION: See
"Reverting to a Single-Disk System"
instructions on how to remove the disk mirroring license. If you do not
follow the correct procedure, you may not be able to restart the
SuperStack 3 NBX system.
The Usage Report displays, for each license installed on the NBX system,
the current number of devices in use for the license type and the
maximum number of devices allowed by that license.
3COm recommends that you make a backup of all licenses on your NBX
system.
1 In the Operations > Licenses dialog box, click Backup Licenses.
2 Click Save, choose a location to save the backup file, and click Save.
You can restore all licenses from a previously created backup file.
1 In the Operations > Licenses dialog box, click Restore Licenses, and
browse to the location in which you saved the licenses backup file.
Alternatively, type full path to the license backup file in the
restore license(s) on this system: text box.
2 Click Restore.
3 Respond to the confirmation prompt message that appears.
Licenses
341
on
page 293
for
Enter path to