Nbx System Database; Nbx System Dial Plan - 3Com NBX 100 Administrator's Manual

30 C 2: D
HAPTER IAL

NBX System Database

NBX System Dial Plan

P
LAN
entries. For more information, see
Create, and TimedRouteOperation Create
The NBX system database contains a default dial plan that is initially
loaded at the factory and is reloaded if you purge the database. The
default dial plan for the SuperStack 3 NBX system is a 4-digit plan; for the
NBX 100, it is a 3-digit plan.
Changes that you make to any system settings, including changes made
by importing a modified dial plan configuration file, are reflected in the
database. When you reboot the system, it loads the database with any
changes that you have made.
The NBX system database includes all of the settings necessary for system
operation:
IP and MAC addresses for the Network Call Processor, telephones, and
■
line cards
Auto Attendant definitions and menus
■
Dial plan configuration file information
■
Voice mail settings and messages
■
Telephone extensions
■
Hardware configuration information
■
Button mappings for NBX and third-party telephones
■
Call group definitions
■
Software license information
■
User profiles
■
You can import a dial plan configuration file to provide the system with a
set of operating instructions for managing the telephone system.
Alternatively, if you have made changes to the currently loaded
instructions through the NBX NetSet utility, you can export the dial plan
configuration file to save it. You can also make changes by editing the
configuration file off-system, using any ASCII editor, and then importing
the modified file. You can easily reuse a given configuration file on many
systems. For more information, see
Configuration Files"
TimedRoute
"Importing and Exporting Dial Plan
on page 45.
Create, TimedRouteEntry
later in this chapter.