System-Wide Settings - 3Com NBX 100 Administrator's Manual

System-wide Settings

You use the System-wide dialog box to make changes to System-wide
settings. Table 55 describes each setting.
To configure system-wide settings, select System Configuration > System
Settings > System-wide. See the Help for procedures on modifying
system-wide settings.
Table 55 System Settings System-wide Dialog Box Fields
Field Purpose
Host Name An IP setting for the NBX system.
A Host name functions only if you add the name to the name
resolution system. If you do not do this, then you must enter
the IP address in the browser when you want to access NBX
NetSet.
SMTP Domain The name of your SMTP domain.
Name
Required for Off-Site Notification by e-mail.
IP Address The IP address of the NBX system.
Default Gateway The IP address of the destination host for any IP packet not
addressed to a host on the local subnetwork.
Subnet Mask An IP setting that identifies the network and host portions of
an IP address on the network.
Primary DNS The IP address of the primary DNS server. You must specify at
least a primary address to use e-mail Off-Site Notification.
Secondary DNS The IP address of the secondary DNS server. If you specify two
DNS IP addresses, they must be the primary and secondary
addresses.
Tertiary DNS The IP address of the tertiary DNS server.
System Settings 277