System Features Affected By The Dial Plan Configuration - 3Com NBX 100 Administrator's Manual

3com networked telephony solutions administrator's guide
Hide thumbs Also See for NBX 100:
Table of Contents

Advertisement

32
C
2: D
P
HAPTER
IAL
System Features
Affected by the Dial
Plan Configuration
LAN
You can route incoming calls to the Auto Attendant port, and you can
instruct the Auto Attendant to route these calls to any internal or external
number.
CAUTION: If you configure the Auto Attendant so that it can access any
external number, you risk the possibility of toll fraud. You can reduce the
possibility of toll fraud by explicitly putting specific external numbers into
the outgoing dial plan table. This precaution prevents outside callers from
dialing any external number except the ones that you define.
There are two types of routes:
Destination routes — Specify the extension of a destination device.
They can also perform digit manipulation operations on the dialed
digits that resulted in the selection of this route before those digits are
dialed on the destination device.
Timed routes — Specify time of day and day of week criteria which,
when met, result in a particular destination route being selected.
CAUTION: If you operate the NBX system in Keyset Mode, routes are not
applicable.
For more information, see
"TimedRoute Create" page
Configuration File Commands"
The dial plan configuration affects several system features:
Keyset Mode Operation Using the Dial Plan
Hybrid Mode Operation Using the Dial Plan
Off-Site Notification
Keyset Mode Operation Using the Dial Plan
If you map any telephone buttons that have LEDs to specific Analog Line
Card ports, you enable Keyset mode in the NBX system. Instead of dialing
a single digit (typically 8, 9, or 0) before placing an outside call, the user
presses a button to select an available Analog Line Card port. The user
defines the routing (that is, the selection of a destination device) by
pressing the button to select the Analog Line Card port; however the NBX
system controls the call using the dial plan.
You cannot map a digital line extension in Keyset mode.
"DestinationRoute Create"
112, and related entries under
on
page
100.
on
page
103,
"Dial Plan

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstack 3 nbx

Table of Contents