3Com NBX 100 Administrator's Manual page 325

Some commands require that operations be stopped or started. For
example, to remove a message from the queue, you must first stop
operations. Similarly, unless you start operations or they are currently
running, you cannot use the "Send all messages now" command.
Table 71 Operations Management Dialog Box Fields
Field
Operations status
Number of outgoing
messages
Time Waiting
# Attempts
Sender
Destination
Remove
Send all messages now The NBX system attempts to send all messages
Send all messages now
and then delete them
Delete all messages
now
Stop operations
Start operations
Voice Profile for Internet Mail
Purpose
The status of the queue of outgoing voice mail messages.
Possible values: Ready, Starting, Processing, Stopped
The number of messages in the outgoing queue when this
dialog box was last accessed or refreshed.
The time that the voice mail message has been waiting in
the queue.
The remaining number of attempts to send the message.
The IP address and extension of the user who sent the voice
mail message.
The IP address and extension to which the voice mail
message is to be sent.
If a message has multiple destinations, the first destination
is listed, and three dots are displayed immediately after the
extension number.
Example: 1057@192.168.15.135...
Select a voice mail message in the scroll list and click this
button to remove the message from the queue. The NBX
system prompts you to confirm that you want to delete the
selected message.
To remove a block of messages, use Ctrl/Shift. Hold down
the Ctrl key to select several non-contiguous messages for
removal.
immediately, and changes the status of each successfully
sent message to Sent.
The NBX system attempts to send all messages in the queue
and deletes each message that is sent successfully.
If a message cannot be sent, it is also deleted.
The NBX system empties the queue of all messages
Stops the queue if it is currently active.
Starts the queue if it is stopped.
325