3Com NBX 100 Administrator's Manual page 75

Table 18 VPIM Advanced Settings Dialog Box (continued)
Field
SMTP EHLO response
SMTP MAIL response
SMTP RCPT response
SMTP DATA response
Configuring VPIM Parameters Using NBX NetSet
Purpose
Definition: The amount of time that the local
system waits for acknowledgement of a EHLO
message.
Detail: After the greeting, the local system sends
either a HELO (or EHLO to get ESMTP) message to
identify itself. The other site then responds with an
acknowledgement of that message.
Minimum: None defined.
Default: 5 minutes
Definition: The amount of time that the local
system waits for an acknowledgement of a MAIL
command.
Detail: After the local system sends out a MAIL
command along with the From information, it waits
for a response from the other site to indicate that the
MAIL command was received.
Minimum: 5 minutes
Default: 5 minutes
Definition: The time that the local system waits for
an acknowledgement of a RCPT command.
Detail: After the system sends out a RCPT command
(one per recipient), it waits for a response from the
other site indicating acceptance or rejection of the
recipient.
Minimum: 5 minutes
Default: 5 minutes
Definition: The time that the local system waits for
an acknowledgement of a DATA command.
Detail: After the local system has specified all of the
recipient information, it sends a DATA command to
indicate that it is ready to send the mail message
itself. It then waits for the other site to acknowledge
the DATA command.
Minimum: 2 minutes
Default: 2 minutes
75