3Com NBX 100 Administrator's Manual page 108

108 C 2: D
HAPTER IAL
PreTranslator Create
PreTranslatorEntry Create
P
LAN
the Auto Discovery process, you can manually configure the extension for
each analog line and each Digital Line Card channel, if you want.
Syntax
PreTranslator Create nPreTranslatorId szDescription
Description Creates a pretranslator. If the pretranslator already exists,
this command removes all of its entries and operations, and overwrites its
description with the new information.
Arguments
nPreTranslatorId
— The description or name of the pretranslator.
szDescription
Example: This command creates a pretranslator, designates it as the first
one (number 1) and give it the title "4-to-3-digit DID/DDI pretranslator."
PreTranslator Create 1 4-to-3-digit DID/DDI pretranslator
Syntax
PreTranslatorEntry Create nPreTranslatorId nEntryId szDigits
Description Creates a pretranslator entry and specifies a string of digits
that are compared to the incoming digits. If the pretranslator entry
already exists, this command overwrites it with the new information.
Arguments
nPreTranslatorId
— An integer in the range 1 through 32768.
nEntryId
— The digits to compare to the incoming digits.
szDigits
Example: These example commands create, in pretranslator 1, entries 1
through 10, each of which looks for a different single digit (0 through 9)
in the incoming digits.
PreTranslatorEntry Create 1 1 0
— An integer in the range 1 through 32768.
— An integer in the range 1 through 32768.