3Com NBX 100 Administrator's Manual page 367

Table 80 Configuration and Status Report Headings (continued)
Heading Description
#OnChs Number of channels in the online state.
AEClosed Autoattendant extension when business is closed.
AELunch Autoattendant extension when business is at lunch.
AEOpen Autoattendant extension when business is open.
AEOther Autoattendant extension for Other hours.
ANI Automatic Number Identification. The telephone number from
which the call originated.
Audio Input Numeric value of audio input control setting.
Audio Output Numeric value of audio output control setting.
BdId Board (card) ID number.
BdId Name Board (card) name.
Brd The number of the board (card) in a multiple board system.
CO Switch Protocol Protocol (ETS1, QSIG Slave) used by the CO switch (not
applicable to T1).
Card Type Type of card (T1, ISDN PRI, E1, BRI).
Ch Channel.
Ch List Channels supported by a DSP.
Ch MAC Address MAC address of a channel.
Ch Name Name of a channel.
ChId Unique identifying number of a channel in a list of channels,
possibly including channels from more than one board.
ChNo Channel number. For example: 1–24 for a T1 board.
CurState Current state of a channel (in use, idle, available).
DNIS/DID Number of digits passed that identify the called party.
DSP Name Name of a digital signal processor.
DSP Status Status of a digital signal processor.
DSP Version Version of code running on a digital signal processor.
Digit Collection Specifies the data the CO sends and the format in which it is
sent over the span of an incoming call. Can include both
DNIS/DID and ANI, and can specify the order in which they
arrive, and the number of digits involved.
Echo Canceller The state of the echo cancellation function. Values: Enabled,
Disabled.
E&M Direction For a T1 line, the direction of the E&M signaling. Values: Two
Way, One Way. Default: Two Way.
System-level Troubleshooting 367