Configuring A Line Card Port - 3Com NBX 100 Administrator's Manual

If you remove a line card from the system, the port information remains in
the database. The extension numbers assigned to the four ports do not
become available for reuse unless you use the NBX NetSet utility to
remove the line card from the configuration database.
This section covers these topics:
■
■
■
■
■
■
Configuring a When you configure a line card port, you can assign it as a member of a
Line Card Port line pool.
You can configure a line card port automatically (recommended) or
manually.
Verify that you have chosen a 3-digit or 4-digit dial plan before you begin
to configure line card ports. See
Configuring a Line Card Port Automatically
To configure a line card port automatically:
1 Select NBX NetSet > System Configuration.
2 Click
3 Enable the
4 Click
Configuring a Line Card Port Manually
Most organizations use Auto Discovery to automatically configure line
card ports. However, you can configure a line card port manually and
select all settings.
To configure a line card port manually:
1 Select NBX NetSet >
2 Click Add.
Configuring and Managing Analog Line Card Ports

Configuring a Line Card Port

Modifying a Line Card Port
Removing a Line Card Port
Verifying Line Card Port Status
Rebooting a Line Card Port
Advanced Settings
. The System Settings dialog box appears.
System-wide
Auto Discover Line Cards
.
OK
Device Configuration
Chapter 2.
check box.
> Line Card Ports.
187