3Com NBX 100 Administrator's Manual page 181

Table 31 Attendant Console Button Mappings (continued)
Button Type
Park
Configuring the NBX 1105 Attendant Console
Description
Maps the Call Park feature to this button. To park the
current call, the user must press the button and dial a
valid Call Park extension:
NBX 100: 601–609. NOTE: The NBX 100 is shipped
with a factory default 3-digit dial plan. If you import any
4-digit plan, you must manually specify any 4-digit
extension ranges that are not set by the imported plan.
SuperStack 3 NBX: 6000–6099. NOTE: The
Superstack 3 NBX is shipped with a 4-digit dial plan. If
you import any 3-digit plan, you must manually specify
any 3-digit extension ranges that are not set by the
imported plan.
Number — Not used.
Prty (Priority) — Not used.
You can also map a button to a specific Call Park
extension by choosing Line / Extension as the Type and
entering a Call Park extension in the Number box. Then,
when you are on a call and want to park it to the
mapped call park extension:
Press the Call Park Access button (by default, the third
■
Access button below the PROGRAM button).
Press the button to which you mapped the call park
■
extension.
To retrieve a parked call from a Call Park extension:
Pick up your telephone handset.
■
Press the button to which you mapped the Call Park
■
extension.
181