3Com NBX 100 Administrator's Manual page 128

128 C 3: D
HAPTER EVICE
C
ONFIGURATION
Table 23 Add Telephone Dialog Box Fields (continued)
Field
Channel Number
Device Name
Telephone Group
Class of Service
Description
Not used when adding a telephone.
If you add a telephone that is connected to a 3C10117 or a
3C10117C ATC, leave this field empty. If you modify the
settings for a telephone that is connected to an ATC, this field
contains N/A (not applicable).
The name that appears in device lists to help you identify this
device. You can use any word with up to 16 characters.
Assigns a set of Button Mappings that correspond to the
group you select. The default groups are:
Default Business Phone Group — The default group to
■
which the NBX system assigns NBX 2102 and 1102
Business Telephones during the Auto Discovery process.
Attendant Telephone Group — The default group to
■
which you assign NBX Business Telephones that have
1105 Attendant Consoles attached.
Default Basic Phone Group — The default group to which
■
the NBX system assigns NBX Basic Telephones during the
Auto Discovery process.
Default 3102 Business Group — The default group to
■
which the NBX system assigns NBX 3102 Business
Telephones during Auto Discovery.
Default Uniden Phone Group — The default group to
■
which the NBX system assigns Uniden Cordless
Telephones during Auto Discovery. This group appears
only if you have added a Uniden interface card to your
NBX system.
If you have created additional telephone groups, their names
appear in this list.
Sets calling permissions. See
page 273 for information about creating and managing CoS
settings.
Class of Service (CoS) on