Configuring Devices For Vlan Operation - 3Com VCX V7000 Installation And Maintenance Manual

104 C 5: I
HAPTER NSTALLING
Configuring Devices
for VLAN Operation
D
EVICES
This section contains instructions on how to configure each VCX device
for VLAN operation.
The V7111 and V7122 gateways cannot be configured to operate on a
VLAN.
The Complement Attendant Software cannot be configured to operate
on a VLAN.
Telephones
To configure any 3Com telephone for VLAN operation:
1 Press the PROGRAM button.
2 Press 6 (VCX Cnfig Menu).
3 Press 2 (Set VLAN Confg).
4 Press 1 (Enable VLANs).
5 Enter the ID number of the VLAN on which you want the telephone to
operate.
6 Press #.
Complement Attendant Software (CAS)
You cannot configure the CAS application for VLAN operation.
3105 Attendant Console
To configure a 3Com 3105 Attendant Console you must have an adapter
that connects to a male 9-pin (DB9) serial port on your PC and has an
RJ-45 port that accepts an Ethernet cable. This table shows the pinouts:
Comm Port Pin #
1
2
3
4
5
6
7
8
Function
No Connection
DCD/DTR
DCD/DTR
GND
RXD
TXD
CTS
RTS