Cover Sheet Feeding: Post Inserter - Oce variolink 9522 User Manual

11
11.7

Cover Sheet Feeding: Post Inserter

The Finisher FS-528/FS-611 with Post inserter PI-506 installed can attach
cover sheets to output copies.
Using Insert Sheet function, cover sheets loaded in the upper and lower trays
of the post inserter will be attached as a front cover and/or back cover or in-
sertion sheet to output copies, and also using Staple mode, a covered and
stapled book can be made.
Or, using Cover with Blank Sheet mode of Booklet and Multi Half Fold/
Fold & Staple with Trimming mode, a booklet-type cover will be attached to
the multiple page signature booklets.
Copied set with
covers attached in
staple mode
Prerequisites
0 Paper size
Upper tray: 8.5" × 11" w/v, 5.5" × 8.5" v, A4 w/v, B5 w/v, A5 v
Lower tray: 11" × 17" w, 8.5" × 14" w, 8.5" × 11" w/v, 5.5" × 8.5" v, A3 w,
B4 w, A4 w/v, B5 w/v, A5 v
0 Upper/Lower tray capacity: 200 sheets (21 lb paper) or within 30 mm
thick each
0 Use ADF.
0 The cover paper size should be the same as copy paper size.
0 Cover paper loaded in the post inserter cannot be copied.
11-22
Copied set with
covers and insertions
attached
Output Setting
Cover sheet/ Insertion
VarioLink 9522