Network Dss Notify Data Delete - Toshiba Strata CTX28 Programming Manual

Hide thumbs Also See for Strata CTX28:

Table of Contents

219 Network DSS Notify Data Delete

Refer to the illustration below and this example: When programming the DNs for telephones in Node

10, enter the DNs and their node ID numbers for DNs in nodes 11 and 12 into the Network DN table,

Program 661.

Table (Prog. 661)

• If the same DN exists in more than one Node (i.e., DN 400), it should not be placed in the Node ID tables

of any node. The user must dial the Node ID where the DN is located, plus the DN to call the DN.

• When using Network DN tables for CTX networking, assign the Primary Node ID in Program 656, but

do not assign overlap codes.

The networking tables shows the DN numbers and node ID that have been assigned in this table.

219 Network DSS Notify Data Delete

System Availability: Not available with CTX28

This program lets you disable the DSS function for the node ID entered in this screen.

1. Click Services > Networking > Network DSS Notify Data Delete.

2. Enter the Node ID of the Network DSS key Notify Data to be deleted.

Table (Prog. 661)

Don't use this program unless requested by Toshiba Technical Support.

QSIG/Non-QSIG

Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04

Table (Prog. 661)

Show Quick Links

Table of Contents

Strata ctx670 Strata ctx100-s Strata ctx100