Step 2C: Set Up Ip Address Of Ctx Winadmin Pc Nic (Windows Xp) - Toshiba Strata CTX28 Programming Manual

Installation
Set Up LAN Connection to Strata CTX
Step 2C: Set Up IP Address of CTX WinAdmin PC NIC
(Windows XP)
Follow the steps below to set up PC Network settings on your CTX WinAdmin PC.
This setup is only for direct connection to the Strata CTX or for simple Hub or LAN connections.
Note
For more complex LAN, WAN or Internet connections, refer to
Internet Connections" on page
1. Click Start > Control Panel > Network and Internet Connections > Network Connections > Broadband
Connection.
2. At the Broadband Connection screen, click the Properties tab, then click on the Networking tab.
3. Select Internet Protocol (TCP/IP).
4. Click on the Properties tab.
5. Select "Use the following IP Address."
6. In the IP address field enter
where
a.b.c = 0~255
Example: 192.168.254.x.
The first three octets a.b.c. have to be exactly the same as the first three octets of the CTX IP address
Note
set in
TCP/IP address set in
7. Click OK and exit.
3-8
a.b.c.x
and x
= 0~252.
Sub-step 7 of Step 2B. X cannot be 253 or above and it cannot be equal to octet d of the CTX
Sub-step 7
3-5.
of Step 2B. This is the static IP Address of your PC.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
"Wide Area Networks and/or