Toshiba Strata CTX28 Programming Manual page 583

7. From File Name box enter: DIPXXXX
8. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
It could take 1 to 5 minutes to update the BIPU
If an error occurs, recheck file names, locations etc. and try again.
9. After the update is complete, select IP Telephone > IP Telephone Data. Select the IP telephone Prime
DN to check that the firmware version level has been updated properly.
To check the IP telephone firmware version directly from an IP telephone
1. Simultaneously press the
2. At the SELECT = prompt, press
3. At the Select function key prompt, press
4. To exit this mode, go off and on hook.
Strata CTX Programming - Part 4: Appendices 6/04
 +ROG
buttons on the IP Telephone.
 +ROG
then press
)%
, the IP telephone will be displayed.
Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
E-9