Chapter 6 - Dadm/Dss Console Dadm; Buttons And Leds - Toshiba DKT3000 Series User Manual

DADM/DSS Console
DADM
DADM
Digital add-on Modules (DADM) can be connected to both the 3000- and 2000-series
telephones to provide additional buttons.The 3000-series telephone requires a 3000-
series DADM; the 2000-series telephone requires a 2000-series DADM.
The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks
similar and has the same functions.

Buttons and LEDs

The DADM3020 adds 20 feature buttons to DKT3000-series telephones. These
flexible feature buttons can be assigned as CO line, Directory Number, DSS, One
Touch Speed Dial or any other flexible feature.
Up to two DADMs can be attached to a
telephone to provide 40 buttons to supplement
the telephone's 10 or 20 buttons.
Each DSS button and
LED that provides a status of the outside line
or station assigned to it. The DSS button acts
like a speed dial button to a specific
extension.
• A station or line shows steady red when in
use by others; green when in use by the
DADM.
• A DSS LED will flash red while making a
call and turn intermittently green once
connected.
• An outside Line LED is green when the
outside line is in use by the DADM
console user. It is red if it is in use by
another telephone user.
Button numbers in the figure to the
Note
right are examples only.
78
/LQH
button has an
209 219
208 218
207 217
206 216
205 215
204 214
203 213
202 212
201 211
200 210
First DADM
Strata CTX DKT3000/2000-Series Telephone 10/02
229 239
228 238
227 237
226 236
225 235
224 234
223 233
222 232
221 231
220 230
Second DADM