Strata Net Qsig Over Ip; Ip Address Convert Table - Toshiba Strata CTX28 Programming Manual

Strata Net QSIG Over IP

System Availability: Not available with CTX28
To use programs 671 and 672, refer to

671 IP Address Convert Table

1. Click Services > Networking > Network
Over IP.
2. Enter Program 671 data.
3. Click Submit.
F
IELD
Remote Node ID
01 BIPU-Q IP Address Route 1
02 BIPU-Q IP Address Route 2
03 BIPU-Q IP Address Route 3
04 BIPU-Q IP Address Route 4
05 BIPU-Q IP Address Route 5
06 BIPU-Q IP Address Route 6
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
"Strata Net over IP Programming Guidelines"
D
ESCRIPTION
Enter the Node ID of the remote CTX that the primary CTX should route to in
the IP Private Network.
Possible values: Up to six digits.
Enter the IP Address of the remote BIPU-Q IP that should be routed to first.
Possible values: 0~255
Enter the IP Address of the remote BIPU-Q IP that should be used if all
channels in the first BIPU-Q route is busy or disabled.
Possible values: 0~255
Enter the IP Address of the remote BIPU-Q IP that should be used if all
channels in BIPU-Q Route 1 and 2 are busy or disabled.
Possible values: 0~255
Enter the IP Address of the remote BIPU-Q IP that should be used if all
channels in BIPU-Q Route 1, 2 and 3 are busy or disabled.
Possible values: 0~255
Enter the IP Address of the remote BIPU-Q IP that should be used if all
channels in BIPU-Q Route 1, 2, 3 and 4 are busy or disabled.
Possible values: 0~255
Enter the IP Address of the remote BIPU-Q IP that should be used if all
channels in BIPU-Q Route 1, 2, 3, 4 and 5 are busy or disabled.
Possible values: 0~255
Services
Strata Net QSIG Over IP
on page A-13.
9-61