Toshiba Strata CTX28 Programming Manual page 66

Installation
Establish Communication with Strata CTX
6. From the Connection Options Menu
(shown at right) enter the following:
• Community Name –
communityName
sensitive). This is the default
community name for CTX
systems.
• CTX IP/Name –
192.168.254.253
is the default IP Address of the
CTX that is set in CTX Program
916.
• IP Address –
192.168.255.254
CTX built-in modem fixed IP
address for
Dial-up connections. It cannot be
changed.
Notes
• If you are connecting to Strata CTX using your modem, click in the Use Dial-Up box and enter the
phone number to connect to your Strata CTX. The CTX IP address in the CTX IP Name field
automatically defaults to the Strata CTX modem's static IP address.
• If you are calling in from a modem line which is already connected to the CTX through manual dialing,
check the Use Dial-Up box. You do not have to enter anything in the Phone Number box. When you
hear modem tone, click Connect Now, then hang up.
• If you have set up the Profile User Management screen with CTX site information, click on the CTX
Host name and IP address of the CTX listed in the box at the bottom of the screen.
• Adding and Saving a new CTX connection can be done by clicking Profile > User Management. For
details see
7. Click on Connect Now. For CTX WinAdmin V2.10G.1 and higher, you will see a small dialog box
appears. Ignore this box. It will close automatically after you see the Connection Complete window and
click OK.
Important!
3-16
(entry is case
(NIC). This
This is the
"User Management" on page
If you are not able to connect after clicking on the Connect Now button, then
re-check the set up steps described in this chapter.
3-19.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
6065