Toshiba Strata CTX28 Programming Manual page 92

System
105 System Data
F
IELD
26 Call Button Jumping
27 Set Domestic Code
29 CPN Numbering Plan
30 SLT Recall Timer
31 Analog Trunk Hunting
32 Display Check Sum
Error
33 Analog Tie Line
Disconnect Timer
34 Analog DID Method
35 ALaw/MuLaw
36 Play Melody
37 Select Melody
38 Internal Pad
4-16
D
ESCRIPTION
Select whether to execute Jumping LED.
Possible values: Enable (default) or Disable
•
If enabled, line calls move from a telephone DN button to a line button after they
are answered. After answering the call, the DN button is cleared to receive
another call.
With Call Jumping, the DN acts as an Answer button. This only applies if the line
that is answered has a CO/GCO/Pooled button appearance on the telephone.
•
If disabled, line calls remain on the DN after they are answered.
Set to 0 (zero) to enable CTX/CIX to insert the leading zero when receiving a
National CLI
Called Party Number numbering plan format.
Possible values: Unknown (default) or ISDN
Hooking = 100mS On_Off Hook = 500mS <<investigate>>
This parameter defines the order in which analog trunks are selected during the
outgoing call trunk selection process.
Possible values: Terminal (default) or Cyclical
Enable a System Checksum error to be displayed and an error log to be created.
Possible values: Enable or Disable (default)
Enable a System Checksum error to be displayed and an error log to be created.
Possible values: Enable (default) or Disable
Analog Tie Line Disconnect Timer enables tandem analog Tie Lines to automatically
disconnect if the timer expires.
Possible values: Enable or Disable (default)
Analog DID method: Normal(DTMF)/MFC-R2 3 digits/MFC-R2 4 digits
Possible values: Normal (default), MFC-R2 3, MFC-R2 3
Choose the companding technique appropriate to the local PSTN. Mu Law in North
America.
Possible values: A Law or Mu Law (default)
Possible values: Start or Stop (default)
Possible values: Melody 1 (default) or Melody 2
Possible values: Enable or Disable (default)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04