Toshiba Strata CTX28 Programming Manual page 420

Telephone Button Programming
800 Series Programs
Table 13-41 Program 804
Button Sequence
804 RS232C Data
Assignment
'# C‚yq
,
804-00 BSIS Port
C‚yq
n,
804-01 Port Speed
A7 C‚yq
, n,
804-02 Port Parity
A7 C‚yq
, n,
804-03 Data Bits
A7" C‚yq
, n,
804-04 Flow Control
A7# C‚yq
, n,
804-05 Wait Timer
A7$ C‚yq
, n,
13-96
Value(s)
n = 1~4 (default = no value)
n = 1. 300
2. 1200
3. 2400
4. 4800
5. 9600 (default)
6. 19200
7. 38400
8. 57600
n = 1. None
2. Even
3. Odd (default)
n = 1. 7 Bits (default)
2. 8 Bits
n = 1. None (default)
2. Flow
n = 0~255
C‚yq
, (default = 30 seconds)
Use this screen to setup the RS-232 serial Ports on the BSIS
interface PCB.
Enter the BSIS PCB port number.
This is the data speed of BSIS port in bits per second (bps).
Note The total combined maximum speed of BSIS ports cannot
exceed 57,600 bps.
This is the parity error checking methods used by the BSIS port.
This is the number of data bits used for each data block.
This is the type of flow control used between the BSIS port and the
SMDI or SMDR device. Must be set to "FLOW" in order for the CTX to
buffer call records.
Maximum time to wait for connection.
1. 0 means wait permanently
2. Timer value can be 1-255 seconds.
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Summary