Toshiba Strata CTX28 Programming Manual page 474

System Error Codes
Station Programming Error Codes
Program Code
33
51
217
52
80
49
49
51
52
218 80
80
82
96
98
219
33
32
49
50
250
51
52
80
Note For FBs in Program 205, 213 and 215, codes shows the entered Feature Code.
B-12
Sub-
FB
parameter
The Node ID entered is over maximum digits, or Node ID was
7"
not entered.
The entered DN does not exist in the system (the entered
7
value conflicts with an existing extension number or
numbering plan).
The entered DN is not designated as an ISDN extension in
7
Program 202.
7
The designated DN does not exist in the system.
7!
The DN entered is already assigned to another Hunt Group. A
7!
DN can only be in one Hunt Group.
The entered DN does not exist in the system (the entered
7!
value conflicts with an existing extension number or
numbering plan).
7
The entered DN conflicts with an existing numbering plan.
7
The entered Hunt Group number does not exist in the system.
7!
The entered DN does not exist in the system.
The number of Hunt Group assignments has exceeded the
7
system capacity.
The allowable number of Hunt Group member assignments
7
has been exceeded.
More than 560 DNs are designated for members of one
7
hunting group.
The Node ID entered is over maximum digits, or Node ID was
7
not entered.
The MAC address entered includes invalid characters. The
7%
valid characters are numerals and alphabet A(a) to F(f).
Despite that "1:Fix" is selected in FB02, the fixed IP address
7!
for this IPT is not registered in the system.
Despite that "1:Fix" is selected in FB02, the fixed IP address
7"
is not set in FB03.
The DN entered is not an IPT. (This number entered conflicts
with a value of an existing numbering plan.) FB which this
error occur : FB00
IPT is not assigned to this DN (DKT etc.).
FB which this error occur : FB00
The DN entered is an extension number that does not exist in
the system.
FB which this error occur : FB00
Error Descriptions
Strata CTX Programming - Part 4: Appendices 6/04